|
Product Details:
|
Name: | Open-Cup Flash Point Tester | Standard: | ASTM D92 |
---|---|---|---|
Temp Range: | Room Temperature ~ 400℃ | Ignition Mode: | Coal Gas |
Temperature Sensor: | RTD, PT100 | Power: | 650W |
High Light: | 650W Petroleum Test Equipment,ASTM D92 Petroleum Test Equipment,SY-3536-1 Cleveland Open Cup Tester |
SY-3536-1 Cleveland Open-Cup Flash Point Tester
Application:
It is used to detect Flash and Fire Points by Cleveland open cup method. It is applicable to all petroleum products with flash points above 79℃ and below 400℃ except fuel oils.
Standard:
ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points - Cleveland open cup method
Parameters:
Item | Name | Details |
1 | Temperature measurement range | room temperature ~ 400℃ |
2 | Ignition mode | Coal gas, Gas flame diameter is 3.2mm~4.8mm |
3 | Heating rate | Correspond with GB/T3536 and ASTM D92 |
4 | Maximum power consumption | 650W |
5 | Accuracy | 0.1℃ |
6 | Flash point detecting device | It applies the test flame automatically |
7 | Temperature sensor | RTD, PT100 |
8 | Ambient temperature | (-10~50)℃ |
9 | Relative humidity | =<85% |
10 | Power supply | AC 220+/-10% V, 50Hz |
11 | Dimension | 340mmx320mmx450mm |
Features:
1. It is newly design and small structure. Stainless steel working table make it elegant and beautiful. The operator can do determination as long as connecting with coal gas or other civil gas. Easy to use and results are exact.
2. It is equipped with wind-shelter and flame extinguishing cover which are accord with requirements of test.
3. It adopts technology of single chip microcomputer and LCD screen. English man-machine interface. The heating device is continuously adjustable. Easy to set parameters.
4. The LCD screen has prompt menu, prompt type input for operation interface. It shows set parameters and real-time display sample temperature and other parameters. Press the record key when flash point appearing. The screen will display and save flash point value.
5. Accurate heating rate. The instrument can do test automatically.
6. Operator only need to observe the flash point appearing. The cost performance is high.
Contact Person: Wendy Lee
Tel: +86 18500992119